K-sun BEE3 Owner'S Manual Download Page 34

Page: 34 / 132

Getting

Started

4. Turning the power on

Observe the following precautions before you turn the power on.

Is the AC adapter connected to the LABELShop

BEE3 and the electrical outlet?

Are the batteries installed properly? (When operating the device with the batteries alone.)

Text you have entered remains even after turning the power off. When the device is turned on
again, the text appears after the selected length unit is displayed. Selected options for the
settings such as font and text size are also indicated.

See

"Display Indicators" (p.20).

Press

Auto power-off

If there is no activity for approx. five minutes, the LABELShop

BEE3 automatically shuts

down in order to save battery power. (Text you have entered remains.)
Press

again to restore.

In order to save battery power, it is recommended that you turn off the power manually
when the device is not to be used.

Length Unit

inch

* Selected length unit is displayed on

the screen for approx. one second.

* Line head icon (

and the cursor will

appear.

Summary of Contents for BEE3





































































































































Search results

Summary of Contents for BEE3

Reviews:

Related manuals for BEE3

Brands by name

Popular brands

K-sun BEE3, Owner'S Manual

Search results

Summary of Contents for BEE3

Reviews:

Related manuals for BEE3

Brands by name

Popular brands