K-sun BEE3, Owner'S Manual

Page: 10 / 132

6
Introduction
General cautions
Be sure to read and understand the "Important Safety Precautions" before using
your LABELShop
£
BEE3.
Unplug the AC adapter from both the device and the outlet after use. This may
prevent possible accidents caused by tripping over the cord.
Do not store the device in direct sunlight, in places with dust or excessive humidity, or in
extreme temperatures.
Do not attach labels on people, living things, public buildings or properties of others.
Do not block or insert objects into the AC adapter socket or the tape eject slot.
Never touch the printhead.
Be sure to use the tape cartridges that has "LABELShop Tape Mark".
Avoid using a tape cartridge with no remaining tapes or pressing without installing
tape cartridge. This may cause overheating and malfunction of the printhead.
Always press + to feed the tape. Never pull out the tape forcibly, otherwise the
tape cartridge will be broken and unusable.
Handle the tape cartridges with care, and avoid having impacts on them.
Do not handle the keyboard roughly. Do not use a pencil or a sharp material to press the
keys. This may damage the keyboard.
LABELShop
£
BEE3 makes sounds when ejecting tapes. This is normal operation for the
device.
Be careful not to cut yourself when using scissors.
Be sure to turn the power off after use.
Be sure to replace batteries with the power turned off. If you replace the batteries while the
LABEL Shop
£
BEE3 is powered, files or data stored on it may be deleted.
If your LABEL Shop
£
BEE3 is not to be used for long periods, remove the batteries, the
AC adapter, and tape cartridge from the main unit. LABELShop
£
BEE3, batteries,
the AC adapter, and tape cartridges should be stored in a dark cold place away
from direct sunlight, excessive temperature and humidity, magnetism, vibration and dust.
If a battery is left inside the device for extended period of time, liquid from the battery may
leak. Follow the instructions given on the package of the battery and replace it before the
expiry date.
Dispose of the used batteries according to the local regulations.
LABELShop
£
BEE3 contains a lithium battery to save texts and files. See the sticker on the
backside of the main unit as a guide for the timing and replace the lithium battery. To
replace the battery, consult the local dealer or our customer center. Replacement is
performed at your expense.
Do not carry out any operations not described in this manual. It may cause injury or
damage to the device.
Contents, specifications, and design described in this manual are subject to change without
prior notice.