UX-Z7MDR
1-8 (No.22042)
2.1.4 Removing the tuner board
(See Fig.12.)
• Prior to this procedure, remove the metal cover.
(1) Remove the card wire on the right side of the main body
from the connector CN1 on the tuner board.
(2) Remove the plastic rivet on the right side of the main body
that attaches the tuner board.
(3) Remove the two screws
F
on the rear side of the main body
that attach the tuner board.
Fig.12
2.1.5 Removing the rear cover
(See Fig.13.)
• Prior to this procedure, remove the metal cover and the CD
mechanism assembly.
(1) Remove the two screws
G
on the rear side of the main
body that attach the rear cover.
Fig.13
2.1.6 Removing the fan
(See Fig.14 to 16.)
• Prior to this procedure, remove the metal cover, the CD mech-
anism assembly, and the rear cover.
(1) Remove the wire from the connector CN603 on the MD
connect board in the right side of the main body.
(2) Remove the four screws
H
on the rear side of the main
body that attach the fan.
(3) Move the fan bracket that attaches the fan from inside the
rear panel upward to remove the two fixing points "
c
". Fan
will be detached at the same time.
Notice
When attaching the fan, attach the two "
e
" to the two "
d
" re-
spectively before pressing the fan with fan bracket.
Fig.14
Fig.15
Fig.16
CN1
Tuner doard
Plastic rivet
F
G
G
Rear panel
Rear cover
Fan
Rear panel
H
H
MD connect board
CN603
Fan
Rear panel
joint c
joint c
Fan blacket
Fan
hole e
hole e
hook d
hook d
