UX-Z7MDR
(No.22042)1-13
2.1.13 Removing the power trans assembly
(See Fig.31 and 32.)
• Prior to this procedure, remove the metal cover, the CD mech-
anism assembly, the front panel assembly, the rear cover, the
amp board, and the MD base chassis.
(1) Move the power cord stopper upward from the rear part of
the main body to remove. Remove the power supply cord
from the connector CN901 on the power trans board.
Notice
The power cord can be removed without removing the
power trans assembly.
(2) Remove the four screws
O
on top of the main body that at-
tach the power trans assembly. Remove the wire from the
two clamps on the bottom chassis.
Fig.31
Fig.32
2.2 Front panel assembly
• Prior to this procedure, remove the metal cover, the CD mech-
anism assembly, and the front panel assembly.
2.2.1 Removing the cassette mechanism assembly
(See Fig.33 and 34.)
(1) Remove the spring that is attached to the cassette door
from inside the front panel.
(2) Remove the four screws
P
that attach the cassette mecha-
nism assembly.
Fig.33
Fig.34
Power trans assembly
Power trans board
CN901
cord stopper
Power cord
clamp
Bottom chassis
O
O
O
Power trans
assembly
P
P
P
Cassette mechanism assembly
Spring
Cassette door
Spring
