UX-Z7MDR
1-28 (No.22042)
2.4.7.3
Removing the cartridge holder assembly
(See Fig.14 and 15)
(1) Remove the two screws
I
on the upper side of the loading assembly.
Fig.14
2.4.7.4
Removing the slide bar and the eject bar
(See Fig.14 and 15)
• Prior to performing the following procedure, remove the car-
tridge holder assembly.
(1) Remove the slide bar upward.
(2) Move the eject bar outward until it stops as shown in
Fig.14. Push the convex part
g
on the bottom of the body
and remove the eject bar from the chassis.
Fig.15
I
I
Slide bar
Eject bar
Part g
Cartridge holder assembly
Eject bar
I
Slide bar
Cartridge holder assembly
Eject bar
k
UD base