UX-Z7MDR
(No.22042)1-29
2.4.8 Traverse mechanism assembly
2.4.8.1
Removing the Insulators (See Fig.16)
(1) Disengage the four insulators from the notches of the
traverse mechanism chassis.
Fig.16
2.4.8.2
Removing the pickup unit (See Fig.17)
(1) Turn over the traverse mechanism assembly and remove
the screw
J
attaching the shaft holder
(F)
.
(2) Move the shaft inward and remove it from the shaft holder
(R)
.
(3) Detach the shaft side of the pickup unit upward and release
the joint h with the pickup guide. Then remove the pickup
unit with the shaft.
Fig.17
2.4.8.3
Removing the pickup (See Fig.18)
(1) Draw out the shaft from the pickup.
(2) Remove the two screws
K
attaching the rack spring.
Fig.18
Insulators
Insulators
Pickup unit
Traverse machanism chassis
J
Joint h
Pickup guide
Pickup unit
Shaft holder (F)
Shaft holder (R)
K
Shaft
Pickup
Rack spring