UX-Z7MDR
(No.22042)1-17
2.2.7 Removing the FL display
(See Fig.45 to 50.)
(1) Remove the four screws
X
on the front side of the front pan-
el that attach the case cover.
(2) Pull out the FL panel from the bosses of the four joint "
n
"
on the FL display cover.
(3) Remove the four screws
Y
that attach the FL display cover.
Remove the card wire from the connector CN671 and CN
672 on the FL connect board inside the FL display cover.
Fig.45
Fig.46
Fig.47
Fig.48
X
X
Case cover
FL panel
joint n
joint n
Y
Y
FL cover
FL connect board
CN671
CN672
FL cover
