UX-Z7MDR
1-24 (No.22042)
2.4 MD mechanism assembly
2.4.1 Removing the main board
(See Fig.1 and 2)
(1) Turn over the body and disconnect the card wire from con-
nector CN408 and the flexible wire from CN407 on the
main board.
(2) Remove the two screws
A
attaching the main board. Slide
the main board in the direction of the arrow to release the
two joints a with the single flame.
(3) Solder part
b
on the pickup in the body. Disconnect the
flexible harness from connector CN321 and CN451 on the
underside of the main board. Then remove the main board.
Fig.1
Fig.2
2.4.2 Removing the mechanism cover
(See Fig.3)
(1) Remove the four screws
B
on both sides of the body.
(2) Move the mechanism cover toward the front to disengage
the front hook of the mechanism cover from the internal
loading assembly (Joint c). Then remove the mechanism
cover upward.
Fig.3
A
A
Main board
(Bottom)
CN408
CN407
Joint b
Joint b
CN321
CN451
Pickup
Solder part b
Main board
Joint c
Fook
Joint c
Mechanism cover
B
B
