Juniper MX2010, Hardware Manual

Page: 664 / 825

•
Issue the show chassis routing-engine command to check the status of the Routing Engines. The output
is similar to the following:
user@host>
show chassis routing-engine
Routing Engine status:
Slot 0:
Current state Master
Election priority Master (default)
Temperature 39 degrees C / 102 degrees F
CPU temperature 35 degrees C / 95 degrees F
DRAM 16351 MB (16384 MB installed)
Memory utilization 7 percent
CPU utilization:
User 0 percent
Background 0 percent
Kernel 2 percent
Interrupt 1 percent
Idle 97 percent
Model RE-S-1800x4
Serial ID 9009094145
Start time 2013-02-16 18:06:28 PST
Uptime 2 days, 20 hours, 54 minutes, 15 seconds
Last reboot reason Router rebooted after a normal shutdown.
Load averages: 1 minute 5 minute 15 minute
0.10 0.03 0.01
Routing Engine status:
Slot 1:
Current state Backup
Election priority Backup (default)
Temperature 38 degrees C / 100 degrees F
CPU temperature 34 degrees C / 93 degrees F
DRAM 16351 MB (16384 MB installed)
Memory utilization 7 percent
CPU utilization:
User 0 percent
Background 0 percent
Kernel 0 percent
Interrupt 0 percent
Idle 99 percent
Model RE-S-1800x4
Serial ID 9009094136
Start time 2013-02-16 18:06:36 PST
648