Juniper MX2010, Hardware Manual, Page: 244 / 825

Figure 79: Unpacking the MX2010
g007441
8. Verify the parts received against the list.
9. Remove the vapor corrosion inhibitor (VCI) packs attached to the pallet, being careful not to break the
VCI packs open.
10. To remove the brackets holding the chassis to the pallet, use a 9/16-in (14 mm) socket wrench, and
use a number 2 Phillips screwdriver to remove the bolts and screws from the brackets.
11. Set the shipping brackets aside for later use to secure the router to the pallet jack attachment.
NOTE: If you ordered a router transport kit, see “Unpacking the MX2010 Router Transport
Kit” on page 228 for instructions on how to unpack and install the router transport kit.
12. Save the shipping crate cover, pallet, and packing materials in case you need to move or ship the router
at a later time.
225