Juniper MX2010, Hardware Manual, Page: 183 / 825

Table 51: Base AC Power Requirements
Power Requirement (Watts) Component
9,439 W (based on 55° C operation)
2,142 W (Typical)
Base system (not including MPCs, ADCs,
and MICs) includes seven SFBs, one host
subsystem (Control Board and Routing
Engine [CB-RE], two fan trays, a craft
interface, four PSMs, and two PDMs.
Table 52: Typical AC Power Requirements for MX2010 Router
Power Requirement (Watts) with 91%
Efficiency Model Number Component
CHAS-BP-MX2010 Base chassis
100 W * 2 = 200 W MX2000-FANTRAY Fan trays, upper
100 W * 2 = 200 W MX2000-FANTRAY Fan trays, lower
440 W * 10 = 4400 W MPC-3D-16XGE-SFPP MPC
150 W * 10 = 1500 W ADC ADC
150 W RE-MX2000-1800X4 CB-RE
200 W * 8 = 1600 W MX2000-SFB SFB—slots 0 through 7
2800 W MX2000-PDM-AC-DELTA Three-phase delta AC PDM (2 per
system) @ 50 A feed (input 1) and 25 A
feed (input 2)
2800 W MX2000-PDM-AC-WYE Three-phase wye AC PDM @ 30 A
feed (input 1) and 15 A (input 2)
2800 W MX2K-PDM-AC-1PH Nine-feed single-phase AC PDM
2800 W MX2K-PDM-OP-AC Seven-feed single-phase AC PDM
If you do not plan to provision as recommended above, you can use the information in Table 53 on page 163
to calculate the power consumption for your hardware configuration.
162