manualshive.com logo in svg

Juniper BGP, Configuration Manual

The Juniper BGP Configuration Manual, available for free download at manualshive.com, provides comprehensive instructions and guidance on configuring the Juniper BGP product. This manual equips users with the knowledge and tools needed to optimize network performance and ensure seamless connectivity using Juniper BGP technology.

Share
Download
background image

IPv6 Node Address P2MP Responder Identifier

in echo requests containing

Multicast LDP FEC Stack sub-TLVs...............241
RSVP P2MP Session sub-TLVs......................241

inclusion in echo requests

specifies address of physical interface or

router ID..................................................240

using in echo requests

that contain RSVP P2MP Session

sub-TLV....................................................241

IPv6 VPNs

carrier-of-carriers................................................475
global export maps.............................................432
inter-AS services.................................................405
intra-AS services.................................................395

K

keepalive messages

BGP.........................................................................7

L

L-LSP..................................................................205, 303
L2VPN address family..........43, 153, 380, 579, 600, 649
l2vpn commands

l2vpn control-word.............................................659
l2vpn encapsulation-type....................................659
l2vpn local-site-id remote-site-id.........................661
l2vpn rd..............................................................659
l2vpn route-target...............................................659
l2vpn sequencing................................................659
l2vpn site-name site-id........................................659
l2vpn site-range..................................................659

L2VPNs (Layer 2 Virtual Private Networks)

address families, configure.................................410
clear

BGP route flap dampening...........................616

configuration tasks..............................................658
configure

address families...........................................410

L2VPN address family...................................43, 380
VPWS address family............................43, 153, 380

labels, switching of MPLS...........................................210
layer 2 services over MPLS

802.3ad switch...................................................540
AAL0 encapsulation............................................517
AAL5 encapsulation............................................516
ATM passthrough........................................512, 515

AAL5 encapsulation.....................................516
control word support...................................517
limitations...................................................517
Martini encapsulation..................................516
OAM cells....................................................516
QoS classification.........................................517

candidate ports...................................................543

CE-side load balancing........................................540
CE-side MPLS L2VPNs over LAG

overview......................................................521

configuration example........................................544
configuring..........................................................529
configuring shim interfaces.........................515, 534
control word.......................................................512
control word support for ATM passthrough.........517
Ethernet aggregation...........................................540
Ethernet raw mode encapsulation

overview......................................................522

Ethernet/VLAN connections................................533
Frame Relay example.........................................544
HDLC

configuring..................................................538
overview......................................................519

how they work....................................................512
interfaces supported...........................................509
load-balancing

adding member interface to group..............543
configuring..................................................543
group...........................................................540
monitoring...................................................501
topology..............................................540, 542

local cross-connects....................513, 520, 533, 538
monitoring..........................................................563
MPLS L2VPN over LAG, configuration

example..........................................................551

MPLS L2VPN over VLAN over LAG, configuration

example..........................................................547

multiservice traffic, interface stacking for...........515
overview.............................................................509
platform considerations......................................510
ports, candidate..................................................543
references for.....................................................511
S-VLAN subinterface with an untagged C-VLAN ID

overview......................................................524

VCC cell relay encapsulation, ATM

configuring..................................................536
overview......................................................517

LDP (Label Discovery Protocol)

ATM n-to-one VCC cell transport (0x0009)

pseudowire (PW) type

used for multiple VCs transmission..............527

bringing up on the pseudowire

for mismatching VCI/VPI range configurations

at the two pseudowire ends.....................525

LDP (Label Distribution Protocol)...............................229

authentication, MD5...........................................285
autoconfiguration................................................283
basic discovery...................................................242
configuring for VPLS signaling............................607
discovery mechanisms........................................242
extended discovery.............................................242
FEC aggregation..................................................281
FEC deaggregation..............................................281

Index

■

699

Index

Summary of Contents for BGP













































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for BGP

Canon CR-1 Mark II Features Manual preview
CR-1 Mark II
Brand: Canon Pages: 8
Canon 3508B001 - PowerShot D10 Digital Camera Software Starter Manual preview
3508B001 - PowerShot D10 Digital Camera
Brand: Canon Pages: 64
Canon 3508B001 - PowerShot D10 Digital Camera Software User'S Manual preview
3508B001 - PowerShot D10 Digital Camera
Brand: Canon Pages: 47
Canon 3211B001 - PowerShot E1 Digital Camera Software Starter Manual preview
3211B001 - PowerShot E1 Digital Camera
Brand: Canon Pages: 83
Canon 3211B001 - PowerShot E1 Digital Camera Software User'S Manual preview
3211B001 - PowerShot E1 Digital Camera
Brand: Canon Pages: 50
On-Q/Legrand DA7559 User Manual preview
DA7559
Brand: On-Q/Legrand Pages: 14
Nortel Quality Monitoring Reference Manual preview
Quality Monitoring
Brand: Nortel Pages: 22
ProfiNet ProfinetCommander User Manual preview
ProfinetCommander
Brand: ProfiNet Pages: 25
Aruba Networks ClearPass Guest 3.9 Deployment Manual preview
ClearPass Guest 3.9
Brand: Aruba Networks Pages: 518
Hitachi Dynamic Link Manager User Manual preview
Dynamic Link Manager
Brand: Hitachi Pages: 746
Yamaha DM2000 V2.1 Supplementary Manual preview
DM2000 V2.1
Brand: Yamaha Pages: 4
Yamaha ASIO DirectKS Owner'S Manual preview
ASIO DirectKS
Brand: Yamaha Pages: 6
Yamaha Audio Owner'S Manual preview
Audio
Brand: Yamaha Pages: 7
Yamaha Arp Owner'S Manual preview
Arp
Brand: Yamaha Pages: 9
Yamaha AE041 Owner'S Manual preview
AE041
Brand: Yamaha Pages: 11
Yamaha Card Filer Manual preview
Card Filer
Brand: Yamaha Pages: 15
Yamaha Add-On Effects Manual preview
Add-On Effects
Brand: Yamaha Pages: 14
Yamaha AN200 Editor Manual preview
AN200 Editor
Brand: Yamaha Pages: 72

Brands by name

Popular brands

Load more brands