Juniper BGP, Configuration Manual

Page: 719 / 748

host1# show l2vpn instance l2vpn1 detail
L2VPN: l2vpn1
Encapsulation Type ATM AAL5 SDU VCC transport
Use of control word is preferred
Send sequence numbers
Route Distinguisher 100:11
Site Range 10
Sites:
Site Name westford Site Id 1
Multi-homed: Yes
Site-Priority: 45
Route Targets:
Route Target: RT:100:2 both
Admin Oper
Interface Local-Site-Id Remote-Site-Id state state
---------- ------------- -------------- ------- -----
ATM2/0.100 1 2 enabled up
ATM2/0.12 1 3 enabled up
ATM1/1.1 1 2 enabled down
Meaning
Table 108 on page 683 lists the show l2vpn instance command output fields.
Table 108: show l2vpn instance Output Fields
Field Description Field Name
Name of VPWS instance L2VPN
Encapsulation type configured for the VPWS instance Encapsulation Type
Local preference for control word, preferred or not preferred Use of control word
Local preference for sequence number, send or don’t send sequence numbers
Route distinguisher configured for the VPWS instance Route Distinguisher
Maximum number of customer sites allowed in the L2VPN instance Site Range
Site name and site ID for each customer site in the VPWS instance Sites
Status of the site. Yes designates a multihomed site. No designates
a site that is not multihomed. Multi-homed
Priority value for the VPWS instance for the multihomed site;
displayed only when the value for the Multi-homed field is Yes Site-Priority
Route targets configured for the VPWS instance Route Targets
Layer 2 interface that is a member of the VPWS instance Interface
Local customer site ID configured on the layer 2 interface Local-Site-Id
Remote customer site ID configured on the layer 2 interface Remote-Site-Id
Administrative state of the connection, disabled or enabled Admin state
Operational state of the connection, up or down Oper state
Monitoring VPWS Instances
■ 683
Chapter 14: Monitoring VPWS