Juniper BGP, Configuration Manual

Page: 600 / 748

To set a statistics baseline for layer 2 services over MPLS:
■
Issue the baseline mpls interface command:
host1# baseline mpls interface
There is no no version.
Related Topics
■
baseline mpls interface
Monitoring ATM Martini Cell Packing Timers for Layer 2 Services over MPLS
Purpose
Display the current systemwide values configured on the router for the three ATM
Martini cell packing timers.
The ATM Martini cell packing timers define the time threshold that the router uses
to collect and concatenate ATM cells in a single VCC cell relay–encapsulated packet.
Action
To display ATM Martini cell packing timers:
host1(config)# show atm mcpt-timers
ATM Martini cell aggregation timers:
Timer1: 1500microseconds
Timer2: 2500microseconds
Timer3: 3500microseconds
Meaning
Table 69 on page 564 lists the show atm mcpt-timers command output fields
Table 69: show atm mcpt-timers Output Fields
Field Description Field Name
Value in microseconds for the first ATM Martini cell packing timer Timer1
Value in microseconds for the second ATM Martini cell packing
timer Timer2
Value in microseconds for the third ATM Martini cell packing timer Timer3
Related Topics
■
show atm mcpt-timers
Monitoring ATM Subinterfaces for Layer 2 Services over MPLS
Purpose
Display the current state of all specified ATM subinterfaces.
564 ■
Monitoring ATM Martini Cell Packing Timers for Layer 2 Services over MPLS
JUNOSe 11.1.x BGP and MPLS Configuration Guide