Juniper BGP, Configuration Manual

Page: 90 / 748

disable-dynamic-redistribute
■
Use to halt the dynamic redistribution of routes that are initiated by changes to
a route map.
■
Dynamic redistribution is enabled by default.
■
This command takes effect immediately.
■
Example
host1(config-router)# disable-dynamic-redistribute
■
Use the no version to reenable dynamic redistribution.
■
See disable-dynamic-redistribute.
redistribute
■
Use to redistribute static routes and routes from other protocols into BGP.
■
Specify the source protocol from which routes are being redistributed with one
of the following keywords:
isis , ospf , static , or connected . Use the static keyword
to redistribute IP static routes. Use the connected keyword to redistribute routes
that are established automatically by virtue of having enabled IP on an interface.
■
You can specify a route map to filter the redistribution of routes from the source
routing protocol into BGP. If you do not specify the
route-map option, all routes
are redistributed.
■
Use the metric keyword to set the multiexit discriminator (MED) for routes
redistributed into BGP. The default MED is the value of the IGP metric for the
redistributed route.
■
Use the weight keyword to set the weight for routes redistributed into BGP in
the range 0–65535. The default weight is 32768.
■
You can specify the type(s) of OSPF routes to redistribute into BGP: internal
routes (
ospf match internal ), external routes of metric type 1 ( ospf match
external 1 ), or external routes of metric type 2 ( ospf match external 2 ).
■
This command takes effect immediately.
■
Use the no version to end the redistribution of routes into BGP.
■
See redistribute.
Redistributing Routes from BGP
If you have redistributed routes from BGP into an IGP, by default only EBGP routes
are redistributed. You can issue the
bgp redistribute-internal command followed
by clearing all BGP sessions to permit the redistribution of IBGP routes in addition
to EBGP routes.
54 ■
Advertising Routes
JUNOSe 11.1.x BGP and MPLS Configuration Guide