Juniper BGP, Configuration Manual

Page: 742 / 748

per-hop behavior........................................................303
nonstandard.......................................................303
per-hop scheduling class............................................303
performance impact
on routers
and transmission of multiple ATM VCs over
single pseudowire....................................528
PHB. See per-hop behavior
ping feature for MPLS networks
connectivity verification
for egress nodes in point-to-multipoint
LSPs.........................................................237
unavailable in point-to-multipoint LSPs
for routers as branch nodes.........................237
for routers as ingress nodes.........................237
for routers as transit nodes..........................237
ping feature in MPLS networks
detecting data plane failures for egress nodes
type value for Echo Jitter TLV......................238
P2MP Responder Identifier TLV
checking for receipt of.................................240
relation with traceroute requests
for point-to-multipoint LSPs.........................239
selecting the egress node for tracing path
using IPv4 Egress Address P2MP Responder
Identifier..................................................240
using IPv4 Node Address P2MP Responder
Identifier..................................................240
using IPv6 Egress Address P2MP Responder
Identifier..................................................240
using IPv6 Node Address P2MP Responder
Identifier..................................................240
verifying connectivity at egress nodes in
point-to-multipoint LSPs
using Echo Jitter TLV....................................237
using P2MP Responder Identifier TLV .........237
using RSVP P2MP IPv4 Session
sub-TLV....................................................237
ping mpls commands
detecting plane failures
in point-to-multipoint MPLS LSPs.................237
for detection of data plane failures
at egress nodes in point-to-multipoint
LSPs.........................................................239
ping mpls ip........................................................235
ping mpls l2transport..........................................235
ping mpls l3vpn..................................................235
ping mpls rsvp tunnel.........................................235
ping mpls vpls....................................................235
platform considerations
BGP.......................................................................14
BGP/MPLS VPNs..................................................389
L2VPNs...............................................................655
layer 2 services over MPLS..................................510
MPLS..................................................................207
VPLS...................................................................585
point-to-multipoint LDP LSPs
error response
during connectivity verification...................238
point-to-multipoint LSPs
traceroute requests
tracking the path to egress nodes in............239
point-to-multipoint MPLS LSPs
configuring routers as egress nodes in................237
connectivity verification
for egress nodes in......................................237
detecting plane failures in
using ping mpls commands.........................237
TLVs for verifying connectivity at egress nodes
Echo Jitter TLV ............................................237
P2MP Responder Identifier TLV ..................237
RSVP P2MP IPv4 Session sub-TLV ..............237
point-to-point MPLS LSPs
detection of plane failures in
with different MPLS applications.................376
troubleshooting and verifying MTU problems in
LSPs with a Martini circuit...........................376
LSPs with a VPLS instance...........................376
LSPs with an IP or IPv6 address...................376
LSPs with an L3VPN or IPv6 address...........376
LSPs with an RSVP-TE tunnel.......................376
policies
reconfiguring BGP.................................................98
policies, test BGP........................................................157
policies, VPLS subscriber.
See subscriber policies for
VPLS
prefixes
BGP.........................................................................9
filter network........................................................83
promiscuous peers, BGP..............................................43
provider core routers.
See P routers
provider edge routers. See PE routers
PSC. See per-hop scheduling class
pseudowire (PW) type
used for cell relay encapsulation of a single VC
versus multiple VCs.....................................561
used for cell relay for a single VC
on an ATM subinterface...............................561
used for cell relay for multiple VCs
on an ATM port...........................................561
pseudowires
associating an ATM port with
before configuring cell concatenation..........528
before configuring VCI/VPI ranges...............528
configuration on both ends of the
matching in the VP/VCI range......................525
not matching in the VPI/VCI range...............525
failure detection
change of state on the ATMx port................526
multiple ATM virtual circuits
and emulation of connectivity between two
ATM ports................................................524
706 ■
Index
JUNOSe 11.1.x BGP and MPLS Configuration Guide