Juniper BGP, Configuration Manual

Page: 116 / 748

■
For BGP, you can specify the following:
■
external —Reverts to the normal BGP rules for propagating the MED; this is
the BGP default
■
internal —Sets the MED of a received route that is being propagated to an
external peer equal to the IGP cost of the indirect next hop
■
Example
host1(config)# route-map nyc1 permit 10
host1(config-route-map)# set metric-type internal
■
Use the no version to delete the set clause from a route map.
■
See set metric-type.
set origin
■
Use to set the BGP origin of the advertised route.
■
Example
host1(config)# route-map nyc1 permit 10
host1(config-route-map)# set origin egp
■
Use the no version to delete the set clause from a route map.
■
See set origin.
set tag
■
Use to set the tag value of the destination routing protocol.
■
Example
host1(config)# route-map nyc1 permit 10
host1(config-route-map)# set tag 23
■
Use the no version to delete the set clause from a route map.
■
See set tag.
set weight
■
Use to specify the BGP weight for the routing table.
■
The weights assigned with the set weight command in a route map override the
weights assigned using the neighbor weight and neighbor filter-list weight
commands.
■
Example
host1(config)# route-map nyc1 permit 10
host1(config-route-map)# set weight 200
■
Use the no version to delete the set clause from a route map.
■
See set weight.
80 ■
Configuring BGP Routing Policy
JUNOSe 11.1.x BGP and MPLS Configuration Guide