Jungheinrich ESE 533, Operating Instructions Manual, Page: 44 / 133

Item Control / Display Function
5 Steering wheel
(optionally attached to
the door)
t
Steers the truck.
6 Display and control unit
t
Displays key travel and lift parameters,
warnings, notification of incorrect operation
and service displays
7 Key switch t Switches the truck on and off.
8 Emergency disconnect
switch
t
Disconnects the power supply. All electrical
functions are cut out and the truck
automatically brakes.
9 soloPILOT
t
Consists of:
– Travel direction switch (61)
– Hydraulic control lever (60)
– Signal button (57)
12 Accelerator pedal
t
Controls the travel speed.
13 Brake pedal t Decelerates the truck.
57 Warning signal button
t
Issues a warning signal.
58 Shunt mode button
t
Lifting, lowering and slow travel when seat
switch is not applied
59 Armrest adjusting lever Changes the armrest position longitudinally
60 Hydraulic control lever t Lifting and lowering.
61 Travel direction switch
t
Pre-selects the travel direction.
62 Driver’s seat heating
switch
o
Switches the driver’s seat heating on and off,
see page 51.
63 Backrest adjustment
t
Adjust the backrest on the driver's seat.
64 Footwell ventilation
switch
t Switches the footwell ventilation on and off.
65 Footwell ventilation fan
t
Footwell ventilation
66 Driver’s seat longitudinal
adjustment
t
Adjusts the position of the driver's seat in the
longitudinal direction.
67 Driver’s seat cushioning
t
Sets the driver's weight for optimum seat
cushioning. The set weight is displayed.
44
02.21 en-GB