manualshive.com logo in svg

Jungheinrich ESE 533, Operating Instructions Manual, Page: 128 / 133

Share
Download
Jungheinrich ESE 533 Operating Instructions Manual Download Page 128

1.2

Customer Service

In accordance with the ESE 533 service interval, to be performed every 1000 service
hours, but at least once a year.

1.2.1

Maintenance contents

1.2.1.1

Standard equipment

Brakes

Test the brake.
Adjust the air gap of the magnetic brake.
Measure the air gap of the magnetic brake.

Electrical system

Test the contactors and/or relays.
Clean the motor with compressed air.
Carry out a frame leakage test.

Power supply

Test the immobiliser on industrial trucks with external charge connectors.

Travel

Correct the transmission oil level or grease filling of the transmission.

Chassis/structure

Text cut-outs triggered by the seat switch, gates, etc.
Check that the panels and covers as well as the floor plate with mounting brackets are
secure. Ensure they function correctly and are safe.

Hydraulic operations

Test the lift-limit cut-off/lift cut-off.
Adjust the lift mechanism.
Adjust the slide pieces.
Correct the hydraulic-oil level.
Test and adjust the pressure relief valve.

Agreed services

Carry out a test run with the rated capacity or a customer-specific load.
Lubricate the truck according to the lubrication schedule.
Demonstration after maintenance.

Steering

Lubricate steering gears or steering chain.

128

02.21 en-GB

Summary of Contents for ESE 533






































































































































Reviews:

No comments