Jungheinrich ESE 533, Operating Instructions Manual, Page: 52 / 133

Adjusting the seat position
CAUTION!
An unsecured driver's seat can cause injury
An unsecured driver's seat can slide out of its guide during travel, resulting in
accidents.
u The driver's seat must be locked in position.
u Do not adjust the driver’s seat while travelling.
Procedure
• Sit on the driver’s seat.
• Pull up the driver’s seat locking lever66 in the direction of the arrow.
• Push the driver’s seat forwards or backwards to the desired position
• Engage the driver’s seat locking lever (66) in position.
The seat position is now correctly set.
Switching the seat heating on and off (
o
)
Procedure
• Press the seat heating switch (92).
Switch setting 1 = Seat heating on.
Switch setting 0 = Seat heating off.
Adjusting the lumbar vertebrae support
Procedure
• Turn the hand wheel (93) to the required position.
Position 0 = no warping in lumbar vertebrae area.
Position 1 = increasing warping in upper lumbar vertebrae area.
Position 2 = increasing warping in lower lumbar vertebrae area.
The lumbar vertebrae support is now set.
52
02.21 en-GB