Jungheinrich ESE 533, Operating Instructions Manual, Page: 31 / 133

3 Using the Truck for the First Time
WARNING!
The use of unsuitable energy sources can be hazardous
Rectified AC current will damage the assemblies (controllers, sensors, motors etc.)
of the electronic system.
Unsuitable cable connections (too long, insufficient wire cross-section) to the battery
(tow cables) can overheat, setting the truck and battery on fire.
u The truck must only be operated with battery current.
u Cable connections to the battery (tow leads) must be less than 6 m long and have
a minimum cross-section of 50 mm².
If the truck is delivered in multiple parts, setup and commissioning must only be
performed by trained, authorised personnel.
Preparation for first use
Procedure
• Check that the equipment is complete.
• Install the battery if necessary, see page 36.
• Charge the battery, see page 40.
The truck can now be started, see page 49 .
31
02.21 en-GB