Jungheinrich ESE 533, Operating Instructions Manual, Page: 84 / 133

Error displays changing a user code
For the following events the LED (115) flashes red:
Cause Remedy
– The user code entered is
not the same length as the
master code
– Switch off the truck, see page 78.
– Repeat the entry, making sure that the master
code is the same length as the user code.
– Operator code to be
changed does not exist.
– Switch off the truck, see page 78.
– Check the user code entered.
– The user codes to be
changed do not match
– Switch off the truck, see page 78.
– Change the user code again, see page 83.
– Tried to change the operator
code to another user code
that already exists.
– Switch off the truck, see page 78.
– Choose a different user code, see page 83.
84
02.21 en-GB