Jungheinrich ESE 533, Operating Instructions Manual, Page: 28 / 133

41
40
41
Lifting the truck by crane
Requirements
– Truck parked securely, see page 58.
Tools and Material Required
– Two ring screws, for capacity details refer to the truck data plate.
– Crane slings, for capacity details refer to the truck data plate.
Procedure
• Remove the dummy plugs from the load section and screw in the two ring screws
(40).
• Insert load hooks on either side of the ring screws.
• Secure the load hooks to the strap points (41).
• Raise and load the truck.
• Lower and deposit the truck carefully (see page 58).
• Secure the truck with wedges to prevent it from rolling away.
• Remove the load hooks and unscrew the ring screws.
This concludes the loading by crane.
28
02.21 en-GB