manualshive.com logo in svg

Jungheinrich ESE 533, Operating Instructions Manual, Page: 111 / 133

Share
Download
Jungheinrich ESE 533 Operating Instructions Manual Download Page 111

5.4

Drive compartment cover disassembly/assembly

Remove  the  drive  compartment
cover
Requirements

– Prepare  the  truck  for  maintenance

and repairs (see page 107).

Tools and Material Required

– Allen key

Procedure

Z

Hold  onto  the  cover  (118)  when
removing the screws.

Remove  the  four  screws  (119)  with
the Allen key.

The  drive  compartment  cover  is  now
disassembled.

119

118

Fitting the drive compartment panel
Tools and Material Required

– Allen key

Procedure

CAUTION!

Arm trapping hazard

There is a risk of trapping when you close the drive compartment cover.

u

Make sure there is nothing between the cover and the truck when you close the
cover.

Insert the cover (118) into the truck chassis.

• Secure the cover to the truck using the four screws (119).

The drive compartment cover is now fitted.

111

02.21 en-GB

Summary of Contents for ESE 533






































































































































Reviews:

No comments