Jungheinrich ESE 533, Operating Instructions Manual, Page: 37 / 133

• Release the M12 pressure screws (44) from between the battery tray (50) and
load section on either side of the truck.
001 001 002 002
003 003
004
Z
The screws secure the battery tray along the travel direction and prevent slipping.
• Drive the cantilevered truck up to the
side of the battery tray (50).
• Drive the cantilevered truck into the fork
pockets on the battery.
• Raise the battery slightly and drive out.
The battery has been removed. Assembly
is carried out in reverse order.
001
CAUTION!
When the battery has been locked the locking plate (46) should not permit any
battery movement.
u Check that the battery is firmly secured.
u If necessary re-tighten the nuts (M10) (47) of the pull bow (48) after tensioning.
37
02.21 en-GB