Jungheinrich ESE 533, Operating Instructions Manual, Page: 51 / 133

3.3 Setting up the operator position
WARNING!
Accident risk
u Do not adjust the driver’s seat, steering column or armrest during operation.
Z
Before starting to travel, adjust the driver’s seat, steering column and armrest (if
necessary) so that all the controls are within reach and can be applied without
having to strain.
3.3.1 Adjusting the driver’s seat
Z
The procedure for adjusting the driver’s seat applies to standard models. For other
models, follow the manufacturer’s setting instructions. When adjusting, ensure that
all controls are within easy reach.
Setting the driver's weight
NOTICE
Incorrectly adjusted seat cushioning
can damage your health
To achieve optimal seat cushioning, the
driver’s seat must be adjusted according
to the driver’s weight.
Set the driver's weight when the seat is
occupied.
u
Hold the weight adjustment lever only
by the recess; do not reach through
underneath the weight adjustment lever.
Procedure
• Fold out the weight adjustment lever (67) as far as it will go in the arrow direction.
• Move the weight adjustment lever (67) up and down to set the seat to a higher
weight.
• Move the weight adjustment lever (67) down and up to set the seat to a lower
weight.
Z
The driver's weight is correctly set when the arrow is in the middle of the display
window (91). The minimum or maximum weight setting is reached when you can
feel a return stroke on the lever.
• After setting the weight, fully fold back in the weight adjustment lever (67).
The driver’s weight is now set.
67
63 66
91
67
92 93
Adjusting the backrest
Procedure
• Sit on the driver’s seat.
• Pull the lever (63) to adjust the backrest.
• Adjust the backrest tilt.
• Release the lever (63) again. The backrest is locked.
The backrest is now set.
51
02.21 en-GB