JUMO AQUIS 500 RS, Operating Manual, Page: 93 / 120

93
11 Technical data
11.1 Digital interface
11.2 Analog temperature input
11.3 Sampling interval
11.4 Measuring circuit monitoring
11.5 Binary input
11.6 Controller
Main input Display range Accuracy Temperature influ-
ence Baud rate
RS485 interface with Mod-
bus master function 0.000 to 9.999
00.00 to 99.99
000.0 to 999.9
0000 to 9999 Depends on
the sensor
used Depends on
the sensor
used 2400 Bd
4800 Bd
9600 Bd
19200 Bd
38400 Bd
Auxiliary input Measuring range Accuracy Temperature influence
Temperature Pt100
(automatic detection) -50 to +250 °C
a
± 0,5_K (up to 100 °C)
± 0,8_K (as of 100 °C) 0.05 %/10 K
Temperature Pt1000
(automatic detection) ± 0,5_K (up to 100 °C)
± 1,0_K (as of 100 °C)
Temperature NTC/PTC Max. 4 kOhm
Input via table with 20 pairs
of values via setup program

0.3 %
b
0.05 %/10 K
a
Can be changed to °F.
b
Depending on the supporting points.
Analog
temperature input Digital interface with
JUMO
ecoLine
O-DO JUMO
digiLine
O-DO S10 JUMO
tecLine
20263x JUMO
ecoLine NTU freely configu-
rable sensor
500 ms Adjustable,
1 to 60 s 3 s 500 ms 1 s Adjustable,
1 to 60 s
Input Underrange/
overrange Short-circuit Open circuit
Temperature Yes Yes Yes
Activation Via potential-free contact
Function Key lock/HOLD/alarm stop
Controller type Limit value controller, pulse length controller, pulse frequency controller,
three-step controller, continuous controller
Controller structure P/PI/PD/PID