JUMO AQUIS 500 RS, Operating Manual, Page: 101 / 120

101
12 Appendix
Switching output 1
Function
No function
Controller output 1
Controller output 2
Controller alarm 1
Controller alarm 2
Controller alarm
AF1 main value
AF2 main value
AF7 main value
AF8 main value
AF1 temperature
AF2 temperature
AF7 temperature
AF8 temperature
Sensor error
Wash timer expired
Calibration timer expired
Switching point 0 to 9999
Margin to switching point
Window range for AF1 /
AF2 0 to 50 % of MR or
0 to 150 °C
Hysteresis 0 to 100 % of MR or
-50 to +250 °C
switch-on delay 00:00:00 to 01:00:00 H:M:S
Switch-off delay 00:00:00 to 01:00:00 H:M:S
Pulse time
a
00:00:00 to 01:00:00 H:M:S
For calibration Inactive
Active
Status retained
In case of fault Inactive
Active
Status retained
In hold mode Inactive
Active
Status retained
Manual mode No simulation
Inactive
Active
Parameter Selection/value range
per default New
setting
a
For pulse times greater than 0 seconds, the OFF-delay is automatically deactivated.