JUMO AQUIS 500 RS, Operating Manual, Page: 14 / 120

4 Mounting
14
4.5 Mounting in a panel
✱
Make the panel cut-out and holes according to the drilling template.
✱
Place the control panel (1) with gasket (2) in the panel cut-out and fasten it
with screws (2) spacing rollers (4) and nuts (5).
NOTE!
For drilling template, see chapter 12.5 "Template for panel cut-out", page 114.
To achieve the specified protection type of IP65, the panel must have the cor-
rect thickness.
(1)
(2)
(4)
(5)
(3)
CAUTION!
To guarantee electrical safety, the cable cover must be mounted, see next
page!