22
1
Re-sewing switch
2
Needle up/down
compensating switch
3
Screen changeover
switch
4
With/without reverse feed stitch
at sewing start switch
5
With/without reverse feed stitch
at sewing end switch
6
Reset switch
6. HoW to usE tHE oPEratIoN PaNEl
6-1. Names and functions of the respective sections
This switch is used to continue sewing from the step on the way
after replacing bobbin thread when bobbin thread has run out
during program stitching step.
This is the switch to perform needle up/down compensating stitching.
(Needle up/down compensating stitching and one stitch compensating
stitching can be changed over with function setting No. 22.)
This is the switch to change over the screen.
This is the switch to turn ON/OFF automatic reverse feed stitch at sewing start.
* This switch cannot be used with the sewing machine which is not
provided with automatic reverse feed stitching device.
For the details, see p. 71.
This is the switch to turn ON/OFF automatic reverse feed stitch at sewing end.
* This switch cannot be used with the sewing machine which is not
provided with automatic reverse feed stitching device.
For the details, see p. 71.
This is the switch to make the value of bobbin thread counter or
sewing counter the set value.
For the details, see p. 96.
1
Re-sewing switch
2
Needle up/down compensating switch
3
Screen changeover switch
4
With/without reverse feed stitch at sewing start switch
5
With/without reverse feed stitch at sewing end switch
6
Reset switch
7
Teaching switch
!5
Power display lamp
!6
Media cover
!7
Media slot
(Madia inserting opening)
!8
CompactFlash (TM)
(Optional : Part No.40000100)
8
Information switch
9
Feed amount display switch
!0
One-shot stitching switch
!1
With/without automatic thread trimmer switch
!2
Thread trimming prohibiting switch
!3
Counter value setting switch
!4
Max.speed limitation variable resistor
!6
1
!7
3
4
!0
9
2
5
!4
!5
6
!3
7
!2
8
!1
!8
