77
Select the kind of stitching
from among free stitching
, overlapped stitching and
programmed stitching .
Press switch
1
of sewing
shape setting screen to
select the kind.
(1) overlapped stitching
The first screen of the
overlapped stitching setting screen
Example) 2-step zigzag
sewing shape setting screen
1) Select showing overlapped stitching with
1
of sewing shape setting screen.
2) Press
in the sewing shape setting screen to display the first screen of the overlapped stitching setting.
3) Input the number of stitches of the respective processes and the number of processes in the first screen
of the overlapped stitching setting.
2
: Set the number of stitches of process A with “+” and “–”. 0 to 19 stitches for the number of stitches of
section A can be set.
3
: Set the number of stitches of process B with “+” and “–”. 0 to 19 stitches for the number of stitches of
section B can be set.
4
: Set the number of stitches of process C with “+” and “–”. 0 to 19 stitches for the number of stitches of
section C can be set.
5
: Set the number of processes with “+” and “–”. 0 to 9 times for the number of processes can be set.
6
: The second screen of the overlapped stitching setting is displayed.
4) Set the enlargement/reduction of the needle entry and the max. number of revolutions in the second
screen of the overlapped stitching setting.
5) By performing depressing the front part of the pedal, the sewing machine repeats the specified number of
times of normal and reverse feed stitching, performs automatic thread trimming and stops.
* Turn ON the thread trimming prohibition switch ON when you desire to stop the sewing machine with
needle UP position without performing thread trimming after all processes have been completed.
* Thread trimming is performed at any occasion in case of one-shot stitching and the last of process. The
one-shot stitching cannot be turned OFF.
6-9. selection of the kind of stitching
standard delivery level of the key lock is “1”. When the level of the key lock is the case
other than “0”, be sure to change the level to “0” to perform the operation below.
q
q
w e r t
w e r t
