82
When the power source is turned oFF without pressing
key, the inputted data returns to
the former one. When you desire to determine the data, be sure to press
key.
When the setting of the feed direction of the custom patternis set to the reverse direction,
the max. speed is limited in accordance with the feed amount used.
(4) Pattern sewing registration, custom pattern copy and custom pattern deletion of
the custom pattern
Pop-up screen of pattern registration, copy and deletion of custom pattern
custom pattern edit screen
(3) custom pattern edit
1) Press switch of
in the sewing shape setting screen to move to the custom pattern edit screen.
2) Set the needle entry position and sewing direction of each step in the custom pattern edit screen.
3
: Set the step with
“+” and “–”.
4
: Set the value of needle entry point from the center of zigzag with
“+” and “–”. “+” value comes on the
right side and
“–” value on the left side.
5
: Set the feed amount with “+” or “–”.
6
: Needle entry position is displayed. (In display of the needle entry position, all positions are displayed
as the normal direction.)
7
: Insert needle entry point 0.0 for one stitch to the existing step. Then the stitches move backward one
stitch by one stitch.
* It is not possible to insert it when the number of total stitches is 500 stitches.
8
: Delete one stitch of the needle entry of the existing step. Then the stitches move forward one stitch
by one stitch.
* It is not possible to delete it when the number of total stitches is
“1” stitch.
3) When setting is completed up to the last step, proceed to the next step, press
9
and put END mark .
* When the number of stitches of the last step is 500 stitches, it is not necessary to set “END” mark .
4) When the setting is completed, press
key to determine.
Press
in the sewing shape setting screen, and the pop-up screen of pattern registration, copy and deletion of
custom pattern appears. Then pattern registration, copy and deletion of the custom pattern can be performed.
6
3 4 5
3 4
8
7
5
9
q
w
e
