15
Installing the connecting rod
1) Move pedal
3
to the right or left as illustrated
by the arrows so that motor control lever
1
and
connecting rod
2
are straightened.
adjusting the pedal angle
1) The pedal tilt can be freely adjusted by changing
the length of the connecting rod.
2) Loosen adjust screw
4
, and adjust the length of
connecting rod
2
.
4-11. Installing the thread stand
1) Punch dots on the positions of the setscrews of
solenoid valve (asm.) and regulator (asm.) on the
bottom surface of the machine table.
Besides, awling is performed on JUKI genuine
table.
4-12. Installing the bird’s nest prevention (cB) type sewing machine
(bottom surface of the machine table)
75
291
34
23
3
106
107
(mm)
4-10. adjustment of the pedal
1
4
3
2
1
2
1) Assemble the thread stand unit, and insert it in
the hole in the machine table.
2) Tighten locknut
1
to fix the thread stand.
3) For ceiling wiring, pass the power cord through
spool rest rod
2
.
