17
3
2
2
1
4
4-13. Lubrication
Fill the oil tank with oil for hook lubrication before
operating the sewing machine.
1) Remove oil hole cap
1
and fill the oil tank with
JUKI New Defrix Oil No. 1 using the oiler supplied
with the machine.
2) Fill the oil tank with oil up to the place where the
top of oil amount indicating rod
3
aligns with
the upper engraved line of oil amount indicating
window
2
.
If the oil is filled excessively, it will leak from the
air vent hole in the oil tank or proper lubrication
will be not performed. So, be careful.
3) When you operate the sewing machine, refill oil if
the top end of oil amount indicating rod
3
comes
down to the lower engraved marker line of oil
amount indicating window
2
.
WARNING :
1. Do not connect the power plug until the lubrication has been completed so as to prevent
accidents due to abrupt start of the sewing machine,
2. To prevent the occurrence of an inflammation or rash, immediately wash the related portions if
oil adheres to your eyes or other parts of your body.
3. If oil is mistakenly swallowed, diarrhea or vomitting may occur. Put oil in a place where children
cannot reach.
• When you use a new sewing
machine or a sewing machine after
an extended period of disuse, run
your machine at 3,000 to 3,500 sti/
min for the purpose of break-in.
• For the oil for hook lubrication,
purchase JUKI New Defrix Oil No.
1 (Part No. : MDFRX1600C0).
• For oiling, perform with oiler
(B19210120A0)
4
supplied as
accessories. Be careful that dust
such as thread waste or the like is
not oiled when oiling.
Upper engraved
marker line
Lower engraved
marker line
