JUKI LU-2860V-7 Instruction Manual Download

Page: 31 / 172

– 26 –

2-20-2. Names and functions of the panel keys

Switch/display

Description

❶

Mode key

This switch is used for displaying the menu screen.

❷

Information key

This switch is used for displaying the information screen.

❸

Sewing pattern No. button

This switch is used for displaying the number of the sewing pattern.

❹

Simplified screen lock button This button is used for displaying the simplified lock status of the screen on it.

Locked:

Unlocked:

❺

Sewing-start reverse-feed

stitch button

This switch is used for changing the ON/OFF status of the reverse feed stitching at the

beginning of sewing. When reverse feed stitching at the beginning of sewing is placed in
the OFF state,

mark is displayed at the upper left of the button.

❻

Sewing-end reverse-feed

stitch button

This switch is used for changing the ON/OFF status of reverse feed stitching at the end

of sewing. When reverse feed stitching at the end of sewing is placed in the OFF state,

mark is displayed at the upper left of the button.

❼

Part number

In the case the part number/process display is selected with U404, the part number is

displayed. In the case the comment display is selected, the comment is displayed.

❽

Process/comment

In the case the part number/process display is selected with U404, the process is

displayed. In the case the comment display is selected, the comment is displayed.

❾

Clock display

The time set on the sewing machine is displayed in this field in 24-hour system.

Sewing pattern display

The selected sewing pattern is displayed in this field.

Customization button 1

A selected function can be allocated to and registered with this button. Initially, the

sewing counter has been factory-allocate and -registered.

Customization buttons 2 - 7

A selected function can be allocated to and registered with this button.

Customization buttons 2 - 11 A selected function can be allocated to and registered with this button.

* Confirmation of data

To change the pattern number, select the pattern you want to use first.
Then, confirm your selection by pressing

For the setting items of the Memory switch or sewing pattern, change the target data and press

to confirm

the change.

After the setting data on the number of stitches of reverse-feed stitching or the number of stitches of multi-layer

stitching has been changed, the changed setting data is confirmed by pressing

<Operator mode>

<Maintenance personnel mode>

Changeover between the operator mode and the maintenance personnel mode is carried out by pressing

❶

and

❷

simultaneously.

❹

❶

❸

❷

❻

❺

❼

❽

❾

❹

❶

❸

❷

❻

❺

❼

❽

❾

Summary of Contents for LU-2860V-7













































































































































































Search results

Summary of Contents for LU-2860V-7

Reviews:

Related manuals for LU-2860V-7

Brands by name

Popular brands

JUKI LU-2860V-7, Instruction Manual

Search results

Summary of Contents for LU-2860V-7

Reviews:

Related manuals for LU-2860V-7

Brands by name

Popular brands