manualshive.com logo in svg

JUKI LU-2860V-7, Instruction Manual

Share
Download
JUKI LU-2860V-7 Instruction Manual Download Page 122

– 117 –

8-8. Grease shortage alarm

8-8-1. Regarding the grease shortage alarm

When the time of maintenance of grease ap-
proaches, the error message "E220 Warning 
against shortage of grease" is displayed.
This error is reset by pressing 

❶

. In this 

state, the sewing machine can be continuously 
used for a certain period of time.

* Refer to 

"8-8-3. Regarding K118 error reset

-

ting procedure" p. 118

 in the case of carrying 

out error resetting (K118).

Once the error message E220 is dis

-

played, be sure to add grease for main

-

tenance. 

❶

8-8-2. E221 Grease-shortage error

If the error message "E220" is not reset, the error 
message "E221 Grease-shortage error" will be 
displayed. 
In this case, the sewing machine operation is dis-
abled. Be sure to add grease and carry out error 
resetting (K118).
* Refer to 

"8-8-3. Regarding K118 error reset

-

ting procedure" p. 118

 in the case of carrying 

out error resetting (K118).

Summary of Contents for LU-2860V-7













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands