JUKI LU-2860V-7 Page 75 Instruction Manual Download

Page: 75 / 172

– 70 –

(4) Adjusting the needle entry alignment position of the needle bar

WARNING :

The needle bar moves during adjustment of this item. Be careful not to place your fingers under the

needle.

<Sewing screen (Maintenance personnel mode)>

1) Press

❶

on the sewing screen under

the maintenance personnel mode.

The "sewing data edit screen" is displayed.

<Sewing data edit screen>

<Needle-bar needle entry alignment position

setting screen>

3) From this item number and beyond, adjust the

needle bar position in the same manner as

"(3) Adjusting the lower stop position" p.

❶

2) Press

❷

The "needle-bar needle entry alignment posi-

tion setting screen" is displayed.

❷

❸

❼

❺

❻

❹

Summary of Contents for LU-2860V-7













































































































































































Search results

Summary of Contents for LU-2860V-7

Reviews:

Related manuals for LU-2860V-7

Brands by name

Popular brands

JUKI LU-2860V-7, Instruction Manual

Search results

Summary of Contents for LU-2860V-7

Reviews:

Related manuals for LU-2860V-7

Brands by name

Popular brands