JUKI LU-2860V-7 Page 36 Instruction Manual Download

Page: 36 / 172

– 31 –

❻

❼

❹

❽

❼

❹

❶

❾

❺

❻

❷

Right-hand

needle thread

Left-hand

needle thread

❹

❺

❼

❻

❽

❶

❷

WARNING :

To protect against possible personal injury due to abrupt start of the machine, be sure to start the

following work after turning the power off and ascertaining that the motor is at rest.

Thread the machine head following the order as

illustrated in the figure.

3-5. Threading the machine head

❸

1. Thread guide

is necessary to prevent the thread from slipping off the needle eyelet when per

forming thread trimming at a position which is outside the material.

2. If thread tangling failure occurs when starting sewing from the material edge, the thread should be

removed from the location where it is clamped with the spring of thread guide

, or thread guide

should be changed with another one.

The thread guide for replacement is supplied with the sewing machine as an accessory.

Part number of replacement thread guide: 40169642

Summary of Contents for LU-2860V-7













































































































































































Search results

Summary of Contents for LU-2860V-7

Reviews:

Related manuals for LU-2860V-7

Brands by name

Popular brands

JUKI LU-2860V-7, Instruction Manual

Search results

Summary of Contents for LU-2860V-7

Reviews:

Related manuals for LU-2860V-7

Brands by name

Popular brands