JUKI LU-2860V-7, Instruction Manual

Page: 48 / 172

– 43 –
[Description of operations of the custom switch]
Function item
i00 No function is set
i01 Needle up/down correction stitch
i02 Thread trimming function
i03 One stitch correction stitch
i04 Function of lifting the presser foot when the pedal
is placed in its neutral position
i05 Material edge sensor input
i06 Needle lifting function
i07 Safety switch input
i08 Sewing counter input
i09 Reverse-rotation needle-up function
i10 Bobbin change switch input
i11 Custom output reset input
i12 Counter reset
i13 Changeover input of pause and stitch alignment
function
i14 Changeover input of interlock function of presser
lifting and needle thread tension
i15 Needle entry alignment
i16 Function of one-time cancelling of reverse feed
stitching at sewing end
i17 Cancellation/addition switch for automatic reverse
feed stitching
i18 S / EBT one-time cancellation input
Function item
i19 One-touch changeover 1 input
i20 One-touch changeover 2 input
i21 One-touch changeover 3 input
i22 One-touch changeover 4 input
i51 Reverse-feed correction stitch
i52 Presser lifting function
i53 Function of cancelling reverse feed stitching at
sewing start and sewing end
i54 Function of prohibiting depress on the front part of
pedal
i55 Function of prohibiting thread trimming output
i56 Low-speed command input
i57 High-speed command input
i58 Reverse feed stitching switch input
i59 Soft start switch input
i60 One-shot speed command switch input
i61 Reverse-feed one-shot speed command switch
input
i62 Center guide input
i63 Thread clamp switch input
i64 Stop switch input
i65 Tsw command prohibition input
i66 Lsw command prohibition needle-up stop input
i67 Jog dial function