JUKI LU-2860V-7 Instruction Manual Download

Page: 169 / 172

– 164 –

❼

5) In the case the cover sensor function is

placed in ON, it is necessary to set the ON/
OFF status of the respective cover sensors.

When the cover sensor of which is to be set

is selected, the cover-sensor ON/OFF setting
screen for the selected cover is displayed.

6) Place the selected over sensor in ON if it is

used, or in OFF if not.

7) Press

❼

to confirm the setting.

<Cover sensor device setting screen>

<Needle bar cover sensor ON/OFF setting screen>

The cover sensor device does not function only by setting the ON or OFF of the corresponding cover.
Place the cover sensor function in ON on the cover-sensor function ON/OFF setting screen.

Summary of Contents for LU-2860V-7













































































































































































Search results

Summary of Contents for LU-2860V-7

Reviews:

Related manuals for LU-2860V-7

Brands by name

Popular brands

JUKI LU-2860V-7, Instruction Manual

Search results

Summary of Contents for LU-2860V-7

Reviews:

Related manuals for LU-2860V-7

Brands by name

Popular brands