JUKI LU-2860V-7 Instruction Manual Download

Page: 70 / 172

– 65 –

6-2-4. Reverse feed stitching (at end) pattern

A stitch shape of reverse feed stitching (at end) is set by following the steps of procedure described below.

(1) Enabling the reverse feed stitching (at end) pattern

①

Displaying the edit screen for reverse feed stitching (at end)

Keep

❶

held pressed for one second.

The reverse feed stitching (at end) edit screen is
displayed.

<Sewing-end reverse feed stitching edit screen>

The sewing-end reverse feed stitching pattern
can be operated when the sewing-end reverse
feed stitching function is placed in the ON state
(

mark is not displayed).

If this function is placed in the OFF state press the
sewing end reverse feed stitch button to switch off

mark display to enable the sewing-end reverse

feed stitching function.

(2) Changing the number of stitches and pitch of reverse feed stitching (at end) pattern

* From the next item number and beyond, set

the function items in the same manner as the
functions for sewing-start reverse feed stitch-
ing. (Refer to

"6-2-3. Reverse feed stitching

(at start) pattern" p. 57

❶

Summary of Contents for LU-2860V-7













































































































































































Search results

Summary of Contents for LU-2860V-7

Reviews:

Related manuals for LU-2860V-7

Brands by name

Popular brands

JUKI LU-2860V-7, Instruction Manual

Search results

Summary of Contents for LU-2860V-7

Reviews:

Related manuals for LU-2860V-7

Brands by name

Popular brands