KE-2050/KE-2060, KE-2050R/2055R/KE-2060R Maintenance Manual
13-53
(25) Touch the [Confirm] button to check the calibration status.
When touching the [Confirm] button, the red circle mark will appear. Touch the center of this
mark.
The yellow mark will appear at the position you have touched. Check whether or not the
position is correct.
If the position is incorrect, touch the [Start] button again to restart the calibration.
After the setup has been completed, touch the [Exit (OK)] button to return to the
“
Touch Panel
Drivers
”
window.
(26) After the window has been returned to the
“
Touch Panel Drivers
”
window, touch the [Continue]
button.
The setup is then completed.
Rev. 2.00
