KE-2050/KE-2060, KE-2050R/2055R/KE-2060R Maintenance Manual
14-63
(2) Maintenance key switch
Switch key supplied
with the machine
Bezel for key switch
Bezel
Key switch
actuator
Projection shall face
leftward.
•
Parts
used
Key cover (HA00535003A)
Key switch actuator (HA005350020)
Bezel (HA005520020)
c
Fit the bezel (black) into the cover FUR panel.
d
Push the key cover into the key switch actuator until a click is heard.
e
Insert the actuator (assembled at 3) into the black bezel, insert the bezel (silver) from the
back of the panel and secure it with the fixing nut.
(3) CONSOLE SELECT, BANK ENABLE SW
•
Parts
used
Use the OPERATION SW CABLE ASM (40002251) or the FEEDER SW CABLE ASM
(40002252).
Bezel (white) with a lens: HA00553002A to be used for the CONSOLE SELECT
Bezel (green) with a lens: HA00530020 to be used for the BANK ENABLE SW
c
Remove the fixing nut of the bezel and fit the bezel. Then tighten the fixing nut.
d
Finally, fit the switch element (with a cable) from the back of the panel. Direction of the
switch element is not important. It can be assembled in either direction.
Rev. 2.00
