JRC JMR-7210-6X, Instruction Manual

Page: 370 / 586

Appendix B Alert, Maintenance INFO and Permanent information B-66
Message Explanation Advice
Time(invalid)
There is a format error or
a status error of the Time
data.
Check the sensor condition. Switch to a
sensor in good condition, if available.
Time(invalid)
There is a format error or
a status error of the Time
data.
Check the sensor condition.
Time(unavailable)
The Time data cannot be
received.
Check the condition of the sensor and the
communication path. Switch to a sensor in
good condition, if available.
Time(unavailable)
The Time data cannot be
received.
Check the condition of the sensor and the
communication path.
TXRX(AZI)
Azimuth signals cannot be
recognized in the radar
antenna.
Confirm that the status is standby and, if the
status is transmitting, set the status to
standby.
After that, set the status to transmitting again.
If it cannot be recovered in this transmitting
state, visually confirm that the antenna of
radar antenna is rotating in a proper way.
If the rotation of the antenna has been able to
be confirmed, turn off the power of the device
and, after confirming cable connection of the
encoder in the radar antenna, turn the power
on again.
If it cannot be recovered after the operation
above, turn off the device and contact the
distributor.
TXRX(Communication
error)
There is a communication
error with radar antenna.
Confirm that the setting of the instruction
machine is Master.
If it cannot be recovered after you check the
connection of the equipment cable in
power-off status and restart, turn off the
power of the device and contact your
distributor.