JRC JMR-7210-6X, Instruction Manual

Page: 21 / 586

19-9 Section 19 Adjusting and Setting up Equipment (for Services)
１
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
19.2.4 Adjusting a radar performance monitor
(Radar screen only)
To adjust a radar transmitting/receiving status, use the [Performance Monitor] dialog or the
[Performance Monitor (SSR)] dialog.
19.2.4.1 Displaying the [Performance Monitor]/[Performance
Monitor (SSR)] dialog
When you select [MON] in the classification pane, the [Performance Monitor] dialog (using a
magnetron radar) or the [Performance Monitor (SSR)] dialog (using a solid-state radar) is displayed in
the edit pane. The items to be displayed change according to the type of the radar antenna.
Note
• When the radar is in the Slave mode, the [Performance Monitor] dialog (or [Performance
Monitor (SSR)] dialog is disabled.
• If a master unit other than straight connection is being set in interswitch setting, the
"Performance Monitor" screen (or "Performance Monitor (SSR) " screen) is disabled (may also
be enabled depending on the equipment setting.).
• When the [Performance Monitor] dialog is displayed, the sector blank in the PPI screen is
hidden. When the solid state radar antenna is connected, the PM sector is displayed; in the
case of the magnetron radar, the sector is not displayed.
• While adjusting the performance monitor, TGT acquisition is not canceled by the target tracking
function.
If a TGT symbol is displayed inside a pattern of the performance monitor and adjusting is
difficult, cancel TGT acquisition once.