JRC JMR-7210-6X, Instruction Manual

Page: 18 / 586

Section 19 Adjusting and Setting up Equipment (for Services) 19-6
19.2.2.4 Adjusting a distance
Adjust the distance of the target on the screen so that the correct distance is displayed.
1
On the radar screen, specify a target whose distance is available in advance.
2
Click on the [Range Adjustment] input box.
A numeric value input keyboard is displayed.
3
Enter an adjustment value in the input box so that the distance of the target specified
in Step 1 indicates the correct distance. (128 to 1024)
For the method of using the numeric input keyboard, refer to "3.16.2 Name and function of each
section of the keyboard".
19.2.2.5 Radar operation modes
Click one of the radar operation mode buttons to select either the [Master] mode or the [Slave] mode.
[Master]:
Can control the radar antenna.
[Slave]:
Cannot control the radar antenna. The display unit uses the radar signals controlled by the master
radar antenna.
Note
While in the Slave mode, the operation to control the radar antenna is disabled.