JRC JMR-7210-6X, Instruction Manual

Page: 273 / 586

24-41 Section 24 Specifications
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録
Receivable signals (i)
Ship heading THS > HDT (over 40Hz)
Course GGA > RMC > RMA > GNS > GLL
Geodetic positioning system DTM
Date information ZDA
COG/SOG RMC > RMA > VTG
Ship speed through water VBW > VHW
Turning speed ROT
Water depth DPT > DBS > DBT > DBK
Wind direction/wind speed MWV > MWD
Air temperature XDR > MTA > MDA
Water temperature MTW > MDA
Atmospheric pressure XDR > MMB > MDA
Humidity XDR > MHU > MDA
AIS VDM, VDO
Alert ACN, HBT
NAVTEX NRX or JRC format
Azimuth/distance to the destination RMB > BWC > BWR (Plotter option)
Water current CUR
Transmittable signals
RADAR system data RSD
Own ship data OSD
Watch Timer Reset EVE* 2
TT data TTM, TLL, TTD, TLB
AIS target data TTM, TLL, TTD
AIS remote control data VSD, AIR, AIQ, ABM, BBM
Remote maintenance data JRC format
Alert ALC, ALF, ARC, HBT
NAVTEX NRM
Azimuth/distance to the destination RMB, BWC
Navigation Data DBK, DPT, DTM, GGA, GLL, HDG, HDT, MDA, MWV, NSR, POS,
RMB, RMC, ROT, RSA, THS, VBW, VDR, VTG, VWR, VWT, XDR,
ZDA, HBT, BWC, RTE, WPL, HSC, OSD, RSD, XTE, ZTG
Visual range
Visual range 1.05m from the center of display
i. The Speed measuring accuracy of speed sensor shall confirm to IMO Resolution MSC.96(72).
The measuring accuracy of GPS shall confirm to IMO Resolution MSC.112(73).
*1 e-Token (Option) is required to use C-map.
*2 When the value exceeds the set value, a message is output indicating a non-operation state. The value is set at
installation.