JRC JMR-7210-6X, Instruction Manual

Page: 268 / 586

Section 24 Specifications 24-36
24.36 NKE-2632
、
NKE-2632-H
GENERAL SPECIFICATION NKE-2632
Dimension Height 720 × Swing Circle 2770 (mm)
Mass Approx. 85kg
Polarization Horizontal
Horizontal beam width: 2.7
°
Vertical beam width: 25
°
Side lobe level:
below -26dB (within
±
10
°
)
below -30dB (outside ± 10 ° )
Revolution Approx. 24 rpm
Power Supply for Motor
100 to 115VAC, 50/60Hz 1
φ
or
220 to 240VAC, 50/60Hz 1
φ
Maximum Wind Velocity 51.5m/s (100kt)
Transmitting Frequency P0N(3035MHz), Q0N(3065
±
4MHz) or (3060
±
4MHz)
Transmission output Peak-to-peak value 250W
±
50% (Average value 5.8W or lower)
Transmitting Tube Solid State Device
TX Pulse width (1st) /
(TX Pulse width, Frequency Deviation Width
(2nd)) / Repetition Frequency
(Observation Range)
SP1:
0.07μs/(4.6μs, 8MHz)/1860Hz or 2280Hz (0.125NM, 0.25NM,
0.5NM, 0.75NM, 1.5NM, 3NM)
MP1:
0.14μs/(9.1μs, 8MHz)/1860Hz or 2280Hz (0.75NM, 1.5NM, 3NM,
6NM)
MP2: 0.29μs/(9.1μs, 8MHz)/1860Hz or 2280Hz (1.5NM, 3NM, 6NM,
12NM)
LP1:
0.57μs/(9.1μs, 8MHz)/1280Hz (3NM, 6NM, 12NM, 24NM)
LP2:
1.14μs/(18.3μs, 8MHz)/640Hz (
3NM, 6NM, 12NM, 24NM, 48NM,
96NM)
Duplexer Circ Diode Limiter
Frond End Module Built-in
Overall Noise Figure 4.0dB (typical)
Performance Monitor Built-in
Intermediate Frequency Amplifier
Intermediate Frequency 63MHz
Band Width 30MHz
Gain More than 28dB
Amplifying Characteristics Linear Amplifier
GENERAL SPECIFICATION NKE-2632-H
Dimension Height 720 × Swing Circle 2770 (mm)
Mass Approx. 90kg
Polarization Horizontal
Horizontal beam width:
2.7 °
Vertical beam width:
25 °
Side lobe level:
below -26dB (within ± 10 ° )
below -30dB (outside
±
10
°
)
Revolution Approx. 48 rpm
Power Supply for Motor 100 to 115VAC, 50/60Hz 1
φ
or 220 to 240VAC, 50/60Hz 1
φ
Maximum Wind Velocity 51.5m/s (100kt)
Transmitting Frequency P0N(3035MHz), Q0N(3065
±
4MHz) or (3060
±
4MHz)
Transmission output Peak-to-peak value 250W
±
50% (Average value 5.8W or lower)
Transmitting Tube Solid State Device
TX Pulse width (1st) /
(TX Pulse width, Frequency Deviation Width
(2nd)) / Repetition Frequency
(Observation Range)
SP1:
0.07μs/(4.6μs, 8MHz)/1860Hz or 2280Hz (0.125NM, 0.25NM,
0.5NM, 0.75NM, 1.5NM, 3NM)
MP1:
0.14μs/(9.1μs, 8MHz)/1860Hz or 2280Hz (0.75NM, 1.5NM, 3NM,
6NM)
MP2:
0.29μs/(9.1μs, 8MHz)/1860Hz or 2280Hz (1.5NM, 3NM, 6NM,
12NM)
LP1:
0.57μs/(9.1μs, 8MHz)/1280Hz (3NM, 6NM, 12NM, 24NM)
LP2:
1.14μs/(18.3μs, 8MHz)/640Hz (6NM, 12NM, 24NM, 48NM,
96NM)
Duplexer Circ Diode Limiter
Frond End Module Built-in
Overall Noise Figure 4.0dB (typical)
Performance Monitor Built-in
Intermediate Frequency Amplifier
Intermediate Frequency 63MHz
Band Width 30MHz
Gain More than 28dB
Amplifying Characteristics Linear Amplifier