JRC JMR-5410-4X Instruction Manual Download Page 453

Page: 453 / 688

15-3

Section 15

Maintenance & Inspection

[Specification] tab

The [Specification] tab displays the equipment licence information when the equipment licence is
available.

Item

Displayed information

Equipment licence
information

Displays the licence standard of the equipment licence.

Save to USB Device

When this button is clicked on, the contents that are displayed are
saved in the USB memory device in text format.

15.1.3 Checking the GPS status

[Operation procedure]
Confirm the GPS Status by performing the following menu operations.
[Menu] button

→

Maintenance

→

GPS Status

The following contents are displayed.

Item

Displayed information

Date/Time (UTC)

Displays the date and time when information is received from GPS.

LAT / LON

Displays the latitude and longitude.

Altitude

Displays the antenna altitude.

Fix Mode

Displays the position fixing mode. One of No Fix, 2D, and 3D is
displayed.

DOP Level

Displays the HDOP level.

RAIM Level

Displays the RAIM level.
Displays one of 10 m/30 m/50 m/100 m/Off.

WER

Displays the beacon signal error rate.

RSSI

Displays the signal strength.

RAIM Status

Displays the RAIM status.
Displays one of Safe/Caution/Unsafe/No Fix.

Fix Status

Displays the position fixing status.
Displays one of No Fix/GPS/DGPS.

Ver.

Displays the ROM version. The content displayed is R26.00 and so on.

The following table shows the contents displayed in the satellite information list section.

Item

Displayed information

System

Displays the satellite positioning system.
Displays one of GPS/QZSS/BDS/GLONASS/Galileo.

Satellite No.

Displays the visible satellite number.

Fix

Displays the satellite positioning status.
Displays one of Use/Demodulation/Non-Demodulation/None-use.

Azimuth

Displays the azimuth angle.

Elevation

Displays the elevation angle.

Level

Displays the SNR signal strength.

Summary of Contents for JMR-5410-4X

















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for JMR-5410-4X

Reviews:

Related manuals for JMR-5410-4X

Brands by name

Popular brands

JRC JMR-5410-4X, Instruction Manual

Search results

Summary of Contents for JMR-5410-4X

Reviews:

Related manuals for JMR-5410-4X

Brands by name

Popular brands