JRC JMR-5410-4X, Instruction Manual

Page: 156 / 688

Section 3 Common Basic Operations 3-30
3.15.3 TT
[TT target]
When TT target is clicked on, a numeric value is displayed.
[Numeric displayed TT target]
When a numeric displayed TT target is clicked on, the numeric value display of TT is cancelled.
3.15.4 (AZ) Acquisition/Activation Zone
[Start Angle]
When Start Angle is clicked on, the cursor is set to the Start Angle/End Angle change mode.
[End Angle]
When End Angle is clicked on, the cursor is set to the End Angle change mode.
[Start Distance]
When Start Distance is clicked on, the cursor is set to the Start Distance/End Distance change mode.
[End Distance]
When End Distance is clicked on, the cursor is set to the End Distance change mode.
Memo
When Acquisition/Activation Zone is not displayed on the radar screen, AIS automatic activation is
disabled. If automatic AIS sleeping targets activation is necessary, please set up the
acquisition/activation zone.
For the setting of an acquisition and an activation zone, refer to “6.5.2 Setting up the automatic
acquisition/activation zone (AZ)”.
End Distance
Start Angle
End Angle
Own ship
Start Distance